MUONFE
Warning
These instrument details pages provide historical context about the devices on a specific instrument, at the time they were migrated to IBEX. These pages may not be up to date with the latest instrument configuration.
This page contains information pertinent to the automation of the Muon Front End Beamline Control at ISIS.
Background & Timeline
The system is due on line September 2016.
Equipment
Manufacturer |
Model |
Type |
Connection |
Driver |
Notes |
|---|---|---|---|---|---|
Danfysik |
8000 |
PSU |
RS232 |
DFKPS |
Created, some outstanding changes needed. See #1208 for comms settings. |
Danfysik |
9100 |
PSU |
RS232 |
DFKPS |
Created, some outstanding changes needed. See #1208 for comms settings. |
Danfysik |
8800 |
PSU |
RS232 |
DFKPS |
Created, some outstanding changes needed. See #1208 for comms settings. |
TDK |
Lambda Genesys |
PSU |
RS232 |
TDK_ LAMBDA_ GENESYS |
Created, setup required |
Glassman |
PG200P2.5 |
PSU |
via PLC |
||
Kicker |
via PLC |
This is monitoring of a relay state |
|||
Momentum Slits |
via Galil |
Galil |
This is a separate project, and the same Galil controls the individual beamline jaws. See see Barndoors and Momentum Slits note |
||
Pfeiffer |
TPG300 |
Vacuum Monitor |
RS232 |
TPG300 |
|
Valve Control |
via PLC |
This is the monitoring of various valves |
|||
Galil |
DMC2280 |
Motor Controller |
Ethernet |
EPICS |
|
PLC |
This will be a modbus connection, as it is an existing PLC. The details are still unconfirmed |
Barndoors and Momentum Slits
The barn doors and momentum slits control the muon beam delivered to the 3 muon instruments: HIFI, muSR and EMU. The control of these devices is described on the Barndoors & Momentum-Slits page.